Product Description:
MAGIGOO PA is a professional-grade adhesive designed exclusively for Polyamide (nylon) filaments in FDM 3D printing. It provides strong adhesion during printing and allows for easy part removal once cooled, with glue residue easily cleaned off for continued use.
Why Use MAGIGOO PA:
Polyamide (PA) filaments, such as PA12, PA6,6, and PA6, are widely used in industrial applications for their high strength, toughness, elasticity, wear resistance, chemical resistance, and heat resistance. However, they are also among the most challenging filaments to print due to their low adhesion to standard build surfaces and high tendency to warp. MAGIGOO PA is specifically formulated to overcome these challenges and is compatible with both standard and fiber-reinforced PA filaments.
How to Use:
-
Shake the bottle well.
-
Apply by pressing the nib to the build plate (activating the inner valve) and spreading evenly.
-
Print according to filament and printer manufacturer recommendations.
-
Allow to cool before removing the print—the part should release easily.
-
Clean the surface with a damp cloth to remove any residue.
Features & Benefits:
-
Strong adhesion for PA filaments during printing
-
Easy part removal after cooling
-
Simple cleanup process with water
-
Designed to work with a wide range of nylon and reinforced PA filament brands
Tips for Best Results:
-
Use a 20 mm brim for larger prints to improve adhesion.
-
If adhesion is too strong, apply a small amount of water under the part to make removal easier.
Safety Information:
-
For PA (nylon) filaments only—using with other filament types may cause excessive adhesion and damage to the build surface.
-
Follow all handling precautions and store in a safe, dry environment.
Contact us: 442 221 9746
